Antenna
Products
BASE STATION ANTENNA TWIN BEAM
Electrical specifications
| Frequency Band | 1710~1880 MHz | 1920~2170 MHz |
| Gain, dBi | 19.5 | 20 |
| Gain Tolerance dB | ±0.7 | ±0.7 |
| Beam Azimuth direction, degrees | Beam L ( +30 ± 3) | Beam R (-30 ± 3) |
| Beam width, Horizontal, degrees | 38 | 33 |
| Beam width, Horizontal Tolerance degrees | ±2 | ±3.5 |
| Beam width, Vertical, degrees | 6 | 5.5 |
| Beam width, Vertical Tolerance degrees | ±0.3 | ±0.3 |
| Beam Tilt, degrees | 0-10 | |
| USLS, Horizontal, dB | 20 | |
| USLS, Vertical, dB 18 | 18 | |
| Front-to-Back Ratio at 180°±30°, dB(Co-polarization) | 28 | 27 |
| CPR, Bore sight, dB | 20 | 18 |
| CPR at sector, dB 8 | 8 | |
| Isolation between cross pol., port to port, dB | 28 | |
| VSWR | 1.5 | |
| PIM, 3rd Order, 2x20W, dBc | -150 | |
| Input Power per port, maximum, watts | 250 | |
| Polarization | Dual, ± 45° | |
| Impedance | 50Ω |
Mechanical Specifications
| Dimensions (W x H x D) | 300 mm x 1598 mm x 150 mm |
| Weight | 17 Kg ( Without Clamp ) |
| RF Connector interface | 4×7/16 DIN Female |
| Maximum wind speed | 60 m/s |
| Maximum wind speed | 200 Km/h |
| Radome material | ASA+FRP, UV resistance |
| Mounting interface | Pole mounting ( Ø40 ~ Ø90 mm ) |
| Mechanical down tilt | 0° ~ 20° |
| Adjustment wheel | 2 x Bottom positioned, RET Compatible (AISG 2.0) |
BASE STATION ANTENNA SINGLE BAND 1800-2100, 2 PORTS
Electrical specifications
| Frequency range | 1710~1880MHz | 1850~1990MHz | 1920~2170MHz | |
| Gain | 17.7 dBi | 17.9 dBi | 18 dBi | |
| Polarization Dual | Dual, ±45° | |||
| -3 dB Beam width
|
Horizontal | 66° | 65° | 62° |
| Vertical | 7.7° | 7.5° | 7.1° | |
| Electrical tilt | 0 ° ~ 10 ° | |||
| Upper sidelobe | >15 dB | >15 dB | >20 dB (@2-5T) | |
| Front to
back ratio |
Horizontal | >25 dB | ||
| Vertical | >25 dB | |||
| Polarization
discremination |
0˚ | >20 dB | >20 dB | >18 dB |
| ±60° | ||||
| Tracking (±60°) <3dB | <3dB | |||
| Impedance | 50 Ω | |||
| VSWR | <1.5 | |||
| Isolation between ports | >30 dB | |||
| IMD (@2×43 dBm) | 300W | |||
| Maximum input power | 300W | |||
Mechanical Specifications
| Dimensions (W x H x D) | 158mm x 1285.2 mm x 78mm |
| Weight | 7.0Kg |
| Connector type | 7/16 DIN Female x 2 |
| Wind load | 343 N (@60 m/s, Frontal) |
| Maximum wind speed | 60 m/s |
| Radome material | ASA + PC |
| Mounting interface | Pole mounting (Ø40 ~ Ø70 mm) |
| Mechanical down tilt | 0° ~ 10° |
BASE STATION ANTENNA4G
Electrical specifications
| Frequency range | 1710~1880MHz | 1920~2170MHz | 2490~2690MHz |
| Gain (dBi) | 17.3± 0.4 | 17.7± 0.4 | 18.0± 0.4 |
| Polarization | Dual, ±45 ° | ||
| Horizontal beamwidth | 65° ± 5° | 65° ± 5° | 65° ± 5° |
| Vertical beamwidth | 7.2° ± 0.3° | 7.0° ± 0.5° | 5.5° ± 0.5° |
| Electrical downtilt (°) (adjustable range) | 0° ~ 8° (Support AISG 2.0) | ||
| 1st Upper sidelobe level | ≥ 17 dB | ||
| Front to back ratio
@180°±30° |
≥ 24 dB | ≥ 24 dB | ≥ 24 dB |
| Cross polarization discrimination (0deg) | ≥ 20dB | ≥ 20dB | ≥ 20dB |
| Cross polarization
discrimination (±60deg) |
≥ 8dB | ≥ 8dB | ≥ 8dB |
| Impedance | 50 Ω | ||
| VSWR | ≤ 1.5 | ||
| Interport Isolation | ≥ 30 dB | ||
| IMD(IM3) | <-150 dBc (2×43 dBm Carrier) | ||
| Lightning Protection | Dc Ground | ||
| Peak input power | 250W | 250W | 250W |
Mechanical Specifications
| Dimensions (W x H x D) | 323 × 1430 × 82 mm |
| Weight | ≤ 13.0 Kg (without clamp) |
| Connector | 4 × 4.3-10 Female, Bottom positioned |
| E-TILT Adjusting Wheel | 2 x Bottom positioned |
| Maximum wind speed | 200 Km/h |
| Wind load (at 150 km/h) (N) | Front/Rear : 497 Lateral : 72 |
| Radome material | ASA+PC, UV resistance |
| Mounting interface | Pole mounting (Ø40 ~ Ø90mm) |
| Mechanical downtilt | 0˚ ~ 20˚ |
© 2018 M3 Comunicaion. All rights reserved.
Web designed by iColor